本品对于云石、水磨石效果较佳。能使石材回复光泽，具有防滑、耐磨性好的特点。

 使用方法：
1.  使用时要确保石材表面完全干净及干爽。
2.  先清洗石材表面的污渍及蜡渍，清洁后待石材表面干爽后才可做晶硬皇。
3.  晶硬皇是属于酸性产品，利用机械重量磨擦热力渗进石材内形成晶硬面处理，而不会形成外层面，使用时要
空气流通。
4.  将晶硬皇装入喷壶，把干爽的石材表面约每100×100cm用喷壶喷上3-4次，约10-15毫升然后用石材面
处理机、刷地机进行来回磨光，直至晶硬皇完全磨干后为最佳。次数越多累积厚度、光泽度越明显效果。
5.  因本产品为高度浓缩及支持环保，所以使用时不要过量药水，以免在表面弄成反效果
This product is for the marble, terrazzo better results. Shiny stone can reply with a non-slip, abrasion resistance
good features.

Usage:
1. Used to be stone appears to be perfectly clean and dry.
2. Cleaning of stone surface stains and wax stains, clean until after the can be done only after the hard-Huang.
3. Crystal hard Huang belongs to acidic products, the use of mechanical  crystal thermal infiltrated the Hard trea
tment, but will not form outside the level, when the use of air circulation.
4. The hard Huang crystal into sprinkling to dry stone surface approximately every 100 × 100cm with the sprink
ling sprayed 3-4 times, back and forth to machine polishing, Jing Huang hard until completely dry grinding is th
e best. The more the cumulative thickness / gloss, the more obvious results.
5. Because this product is a highly concentrated and support environmental protection, so do not use too much s
yrup, so that the surface has brought about negative effects